Tag Archives: junos

Junos Basics – Inter VLAN Routing

In my previous Junos Basics post I covered the configuration steps required to create VLAN’s on a Juniper switch and assign interfaces to them. In this post I’ll step through the config to enable routing between these VLAN’s and also show a couple of verification commands to check it’s working as expected. Firstly we configure […]

Junos Basics – Creating VLAN’s

This is the first in a series of blog posts covering some of the basics of Junos. In this post I’ll be covering the process of creating VLAN’s on a Juniper switch and assigning interfaces to them. The model of switch I am using is an EX2200-C, running Junos 11.4R1.6. Creating the VLANs’s is very […]